Atto FibreBridge 6500
- Категории: Fibre Channel Storage Controllers
- Производитель: ATTO
Мосты между сетью Fibre Channel и SAS/SATA накопитялями ATTOFibreBridge™ позволяют легко подключить к существующей SAN системе дополнительные дисковые или ленточные накопители. Разработаные полностью интегрированными и совместимыми с спецификациями протоколов Fibre Channel и SAS мосты FibreBridge™ легко устанавливаются и безупречно работают. Мосты предназначены для установки в рэковую стойку, на рабочий стол или для интеграции с другим оборудованием.
Уникальная комбинация характеристик эксклюзивной технологии intelligent Bridging Architecture™позволяет при довольно простой установке и настройке достигать молниеносной производительности и получать равномерные потоки передачи данных.
Ключевые характеристики:Подключаемость обеспечивает интеграцию в Fibre Channel сеть любых устройств с SAS/SATA портами. Широкий диапазон включает модели для работы в Fibre Channel сетях 2 Gb/s, 4 Gb/s или 8Gb/s. Программное обеспечение ExpressNAV™ основано на доступном web интерфейсе и позволяет с любого места в сети наглядно и просто проводить для подключенных мостов конфигурирование, управление и диагностику работы. Множество опций управления позволяют сконфигурировать мост для работы в любой сетевой систме SAN.
The ATTO FibreBridge® 6500 integrates SAS/SATA disk or tape storage into a Fibre Channel SAN, increasing availability and scalability while allowing the use of direct attached storage on a shared Fibre Channel network. It reduces CAPEX and OPEX by consolidating direct attached storage and reducing the number of required cards, cables and switch ports. The FibreBridge® 6500 also leverages ATTO`s intelligent controller technology to add superior management and monitoring to direct attached storage.
The FibreBridge® 6500 is available in a rackmount form factor with single or dual power supplies.
With Fibre Channel disk drives being phased out for SAS drives, the FibreBridge® 6500 will allow you to connect newer, faster and higher capacity SAS or SATA drive technology to your existing 2, 4 or 8Gb Fibre Channel SAN. By eliminating the Fibre components in a drive chassis, power consumption is reduced along with costly Fibre components such as SFPs and the quantity of switch ports required by storage.The FibreBridge® enables users to manage storage infrastructures with features not found in direct connect technologies. Advanced read ahead and write cache algorithms in the FibreBridge® give users the highest level of performance. Robust error processing enables the FibreBridge® to manage disk and communication errors between targets and initiators. Email notification of errors and persistent error and trace logs assist troubleshooting in the field to minimize downtime.
- Two 8Gb/s Fibre Channel ports by two x4 6Gb/s SAS connectors (8 phys)
- Auto negotiates to 8Gb, 4Gb or 2Gb Fibre Channel
- Includes two optical 8Gb/s LC SFP+ modules
- SAS QSFP modules support passive and active copper with support for optical connectors
- Supports SAS and SATA hard disk drives
- Supports SAS and SATA flash solid state disk drives (SSD)
- Supports SAS Tape devices
- Capable of supporting up to 240 drives
- Up to 1200MB/s sustained transfer rate
- Up to 75,000 IOPS
- Backward compatibility with all previous SAS protocols
- Drive Map Director™ patented SAS device mapping
- Features intelligent Controller Architecture™ for optimized performance
- ExpressNAV™ Storage Manager for easy remote configuration, management and diagnostic capabilities
- Built-in temperature monitoring
- Capable of scaling performance, connectivity and reliability with redundant controller support
- Statistic Reporting for SAS and Fibre Channel ports
- Available with dual fixed power supplies
- Worldwide certifications
- Advanced integration available for OEM applications
- SNMP and SNMP MIB support
- MicroATX embedded form-factor available
- 2-Year standard product warranty
- Audible Alarm
- No batteries
- RoHS Compliant