iScan Pro конвертер видеосигнала

Конвертор композитного/S-video/компонентного видеосигнала в RGB/YPbPr Video Processing Motion-adaptive video deinterlacing Source adaptive processing NTSC sources: Film (3:2 pulldown detection) Computer graphics (30 frames/sec)Video (60 fields/sec) PAL/SECAM sources: Film (2:2 pulldown detection) Computer graphics (25 frames/sec) Video (50 fields/sec) Source Transition Management provides seamless transitions between source types Auto-dynamic thresholds enable reliable 3:2 pulldown & 2:2 pulldown detections even with noisy sources Motion detection on per-pixel basis Four input fields used to determine contents of each output frame Cubic interpolation for pixel calculations Diagonal processing reduces "jaggies" Low-noise, high-accuracy 10-bit video DACs Input Stage High-performance multi-standard video decoder High-quality adaptive comb filter for two-dimensional Y/C separation Video Input One S-Video input One composite video input One component video input Auto sensing and switching Accepts standard NTSC, PAL & SECAM signals Video Output 15-pin VGA-type HD connector RGB or YPbPr output colorspace Separate H, V synchronization; composite sync; sync on green (or Y) Output: 480p progressive scan video, 31.5kHz horizontal scan rate for NTSC input sources 576p progressive scan video, 31.25kHz horizontal scan rate for PAL and SECAM input sources RGB - 0.7 Vpp, TTL Sync YPbPr - 0.7 Vpp, Sync on Y-1.0 Vpp Controls Input select/priority switch (1/2/3) Picture controls: brightness, contrast, saturation, hue, and sharpness Aspect ratio selection (Normal or Squeeze) Output color space select (RGB or YPbPr) Input Cables Component Video S-Video Composite Video Power 9W, 100-240VAC, 50/60Hz Dimensions (in/cm) 8.3/21L x 5.8/14.7W x 1.4/3.5H