• Teradek

Colr - устройство

840 $
Teradek
  • Overview
    COLR is a real-time LUT box, camera control bridge, and HDMI/SDI cross-converter in one tiny package. COLR integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.

    Looks Mean Everything
    During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

    COLR in a hand
    Colr with laptop running Pomfort livegrade
    Works with Pomfort LiveGrade
    COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

    Monitor Calibration with SpectraCal
    Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

    Connected Set
    With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.



    • LUT Box (CDL 1D and 33-Point 3D LUTs)
    • HDMI/SDI Cross-Converter
    • Wireless Controller for Ethernet Cameras
    • Supports 10-Bit Color
    • Simultaneous HDMI and SDI Outputs
    • Integrates with Pomfort LiveGrade Pro
    • Supports Virtually Every Camera Signal
    • Compatible with Virtually All Monitors
    • Convert RAW & LOG Signals for Monitoring
    • Part of Teradek Connected Set Workflow

    Video Inputs

    •  1 x SD/HD/3G-SDI (75 Ohm BNC)
    •  1 x HDMI Type-A receptacle

    Video Outputs

    •  1 x SD/HD/3G-SDI (75 Ohm BNC)
    •  1 x HDMI Type-A receptacle

    Color Sampling

    •  SDI Input/Output: 10-bit YCrCb 4:2:2
    •  HDMI Input: supports 8-bit RGB 4:4:4, 8-bit YCrCb 4:4:4, 12-bit YCrCb 4:2:2
    •  HDMI Output: 8-bit RGB 4:4:4

    Supported Resolutions

    •  1080p 23.98/24/25/29.97/30/50/59.94/60
    •  1080i 50/59.94/60
    •  1080PsF 23.98/24/25
    •  720p 50/59.94/60
    •  480p59.94, 576p50 (HDMI only)
    •  480i59.94, 576i50

    Test Pattern Generator Support

    •  None

    Video Format Conversion Support

    •  None

    Color Correction

    •  CDL/1024 1D LUT (supports 10-bit color)
    •  33x33x33 3D LUT (supports 10-bit color)

    Network Protocols

    •  TCP/IP, UDP, HTTP, DHCP

    Software Or Platform Integration

    •  Pomfort LiveGrade, SpectraCal CalMAN, and more

    Audio Input

    •  Embedded HDMI and SDI Audio Input

    Audio Output

    •  Embedded HDMI and SDI Audio Output

    Dimensions

    •  2” x 1” x 4” (50.8 x 25.4 x 101.6 mm)

    Weight

    •  6oz (170.1g)

    Http

    •  WebUI for Configuration and Control

    Configuration Interfaces

    •  OLED Display with joystick navigation buttons

    Switches

    •  On/Off Switch

    Usb Interface Functionality

    •  Powered USB 2.0 host port

    Ethernet

    •  Ethernet: 10/100/1000BASE-T Gigabit

    Wireless

    •  WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO

    Rf Channel Selection

    •  Auto with 3 modes: (2.4 or 5 Ghz), Auto (2.4 GHz only), Auto (5 Ghz only)
    •  Configurable to specific channels

    Power Input

    •  2 Pin Connector Power Input

    Nominal Power Consumption

    •  8W, 7W(no WiFi)

    Auxilary Power Input

    •  6-28V DC

Категории: TV оборудование, Colr

Спецификации